Best Ways To Match A Paint Color

There are several ways to match a wall paint color and in this article, we share the best options to get the same or a similar color for your walls. It is hard to get the exact same color, and even if you use one of the following techniques, there may be a slight difference between the new and old colors. That's because most paint colors tend to fade over time, and the dirt that it accumulates can make the color look darker even if you clean it. So when trying to match a color, we recommend painting an entire wall or section to avoid a noticeable difference between the new and old colors.

To match a paint or stain color, we recommend the following four options:

#1. Look for old paint cans.

That's right! When matching a color, one thing that most people forget is to look for old paint cans. Homeowners often tend to keep the leftover paint after a paint job is completed, and one of the best ways to match a color is by using the same formula, which is located on most paint labels. Although old paint is usually not good to use, obtaining the color code from the label can be an easy solution, so don't forget to look for it around your basement, shed or garage.

#2. Take a sample from your walls.

Another way to get the same color is by cutting a piece of your drywall and taking it to the paint shop. This option requires more work but is very accurate.

To get a matching color with a piece of drywall, you'll need the following:

Utility knife.
Small putty knife.
Small spackling paste.
Sanding sponge.

Steps to match the color with a sample from your drywall:

One: Get a piece of your drywall. Using a utility knife, cut a small square piece, approximately the size of a quarter. Most drywalls have an upper layer of paper, which makes it easier to obtain a piece of it for the sample.
Two: Take the sample to the paint store. Most paint stores will scan your sample and make the paint with that same color.
Three: Patch the hole with the spackling paste using the utility knife. Let it dry for at least five hours. Sometimes spackling paste will sink a bit after it dries, so adding another layer of it may be necessary.
Four: Sand the area with the sanding sponge until the surface is smooth and even. Adding primer after sanding can increase paint adhesion and decrease the chances of bubbles forming under the paint.

#3. Use the Sherwin-Williams ColorSnap Match Pro.

color matching with Sherwin Williams ColorSnap Match Pro

With a price tag of $71.99 plus tax, this can be the most expensive way of DIY. But if the price isn't a problem, we recommend the Sherwin-Williams ColorSnap Match Pro. It is a color scanning technology that allows you to scan smooth or textured surfaces. It is equipped with its own light source to ensure precise color scanning, the ColorSnap Match Pro pairs with the free ColorSnap Match app on iOS and Android devices.

#4. Use a color wheel.

Some homeowners order their paint with a customized color, but most people buy paint with a color that was already created by the paint manufacturer and is included in a color wheel. Trying a color wheel to compare your color can be a good idea. Most national paint stores carry color wheels which are available to customers.

Orlando FL Painters is a local professional and experienced painting company serving Orlando and surrounding areas. If you need help painting the interior or exterior of your home or business, please contact us. We are always happy and ready to help. Contact Us

Google Sites

Report abuse